Sweethearts of the Caribbean Regatta
Tortola, British Virgin Islands

Feburary 11th & 12th on Tortola, British Virgin Islands, was another great sailing day for the twenty-eighth annual Sweethearts of the Caribbean Yacht race. The event was co-sponsored by the "Loyal" West Yacht Club and the Jolly Roger Restaurant and Inn, at the West End of Tortola, and was attended by hundreds of yacht racers and " yacht racer chasers".

Over 35 Yachts from thirteen feet to eighty three feet from the surrounding Caribbean islands and local British Virgin Islands, competed in several types of classes, with everyone going away a winner as the Yacht Club, in its long standing tradition and motto lived on as usual, "no one goes home empty handed when it comes to awards!" Another great sailing event, including late night parties and live bands, at the "heart beat" of Tortola, the West End.

Read the full article at:
28th Annual Sweethearts of the Caribbean Regatta
For more photos go to:
Escape BVI Photo Gallery

Duane Smith

By - Nancy Terrell

Duane Smith, President of the Virgin Islands Power Boat Association carries the Queen's Baton for the 2006 Commonwealth Games in Australia on Youth Instructor, with her new mast, in the Queen's Water Parade

Jason Holmes, below with the tree for the new mast, is from Bosham, UK, where he apprenticed with Combes Boatyard for 5 years in wooden boatbuilding. He has been a Shipwright for 13 years and specializes with wooden masts. He was the Foreman for the 80' mast on White Wings, a famous Alden classic sloop featured on the cover of Classic Yachts. "Youth Instructor is a well built boat and now has a mast to suit the boat. They shouldn’t have any trouble with the rigging. I enjoyed doing it and lost 2 stone in the making. It was nice to do - something that I haven't done in a long time - the "Zen" of woodworking - very therapeutic."

Jason Holmes

Tortola Sloops are a large part of the culture of the British Virgin Islands. Youth Instructor, a Tortola Sloop built in the 1990's by Osmond Davies of East End, has for various reasons gone through three masts since her original launching. After the third mast broke, the day before Foxy's Wooden Boat Regatta this year, Gov. Macan met with Dave Cooper, Commodore of the WEYC - organizers of the races under which the Island Sloops sail, and expressed a desire to have a proper mast made for Youth Instructor. The governor wanted to make sure that the boat was ready for the Island Sloop Shoot-Out during the BVI Festival. Jason (below) looks at the job before him. Cooper went to Mike Andrews, General Manager of Yacht Restoration at Nanny Cay, and asked him for a quote on the job. The results were viewed as Youth Instructor raced against Moonbeam two months later.

Builder of the Sailing sloop Youth Instructor
Osmond Davies and his wife

The Tortola Sloops are fractional rigged boats - the foresail stops six feet from the 32.6’ masthead. The process of making this mast is quite interesting. Jason Holmes was in charge of the project and his excellence as a shipwright is seen in the finished product. The 40' long & 12" diameter log, from which the mast was made, was de-barked and treated before arriving in the BVI. Because the center growth ring is usually never in the center of the tree the first thing Jason had to do was center the trunk. "I set up a round disc that was to be the size of the finished mast and centered it on the rings. The more centered the trunk is the more stability it will have as a mast. I squared the log on the center growth ring to begin the project, which would make each of the four sides between 7" and 8". At this time I also put the taper in so that it is smaller at the masthead than at the heel. (Youth Instructor's masthead is 3.5" in diameter and her heel is 6.5".) I began "sizing", which is a geometric way of making something round out of a square. The process is complicated as I size and taper at the same time. During this process you can't walk away from it because you lose your eye, or your "feel", for it. That mast was in my dreams for two weeks."

Sailing sloop Youth Instructor

The mast was transferred to four chocks and planed, with the grain, from the heel to the masthead. This process took 8 hours a day for seven solid days. Once the chocks are level and straight you work one side at a time. Jason started with the worst side first, to get it centered, and then planed from there. It is then turned 180 degrees and the process is repeated with each rotation - planing, sizing, until it is round and of the size required. It is sanded, primed and painted - Jason used a hand planer at the end for a proper finish.

This is the first mast, out of the four that Youth Instructor has had, that was made out of a solid tree. The others were "glued up" with pressure treated pine of 2 x 6's. The first mast broke under sail due to too many knots in the wood. It was repaired quickly in order to sail in a regatta. It then broke again as some other knots were too flexible for the boat. Another mast was made, similar to the first and it too was too weak and delaminated at the glue joints. The third mast was donated by a wooden boat owner who's boat had been given to Neptune - a conversion was tried which failed when the mast was stepped, the day before Foxy's.

Sailing sloop Youth Instructor

Governor Macan races on the Tortola Sloops each year and has had a true concern for the fate of the Island Sloops since arriving in the BVI. He tells me, "Sloops were a cornerstone of the economy of the Virgin Islands, and it is vital that we keep examples afloat and in working order so that today's kids can understand their history. I am delighted that that, with this new mast, Youth Instructor's, continued success can be guaranteed".

As lovers of these classics we all thank him for coming to the rescue - and also to Jason for having the talent to sculpt a mast truly worthy of a Tortola Sloop.

A special fund raising event is being held at the Governor's on Feb. 28th 2006 - open to everyone with tickets at $20 each.